By 2030 we could see a rise in space tourism and most likely the human habitation of the Low Earth Orbit will trigger the shift towards living beyond Earth. Even though realizing the dream of setting foot on the red planet is some decades still to go, living on the lunar surface is not a far-fetched craving.

The challenges in colonizing planets or satellites beyond the Earth’s bounds are immense and taking them one step at a time is the key. One of the challenges is to provide a safe haven for inhabitants in inhospitable conditions. This project dubbed Momo wants to address this with a flatpack and modular option for practicality. Developed by MIT’s Department of Architecture and MIT Media Lab in association with AeroAstro, the self-assembling lunar habitat is among the best ideas so far we’ve come across.

Designer: MIT Media Lab

Keeping in mind the things that could go wrong in alien environments, the Momo habitat is completely replaceable in case there is a breach or malfunction. Rather than replacing the whole habitat, the compromised module can be swapped with a new one. This saves time and ensures the inhabitants have one less thing to worry about. The ultimate goal for developing Momo will be to support the Arthemis III mission and assist in the long-term lunar settlement mission. Oen can realize the extent of the seriousness of this undertaking by the fact that MIT Departments will be headed by the NASA Marshall Space Flight Center, Jhonson Space Center, Brookhaven National Laboratory and SpaceX.

For the first phase, the compact habitat will have a design that flat-packs inside the Starship HLS cargo space. It’ll be developed keeping in mind at all times about the safety and efficient space utilization. The modular aspect allows for versatile functionality, for instance, realigning the aluminum frame and high-density polyethylene membrane for setting up camp depending on the terrain of the Moon. It can be anything from a safe airlock compartment, windows, work desks, or even exercise areas.

The post Momo lunar habitat is a reconfigurable compact dwelling for future Moon settlements first appeared on Yanko Design.

Wayne Enterprises and T3MP3ST have one more reason for Batman fans to go on a spending spree if they like exploring the waters. This is the Maverick GT Stormy Knight electric exploration vehicle developed by the two companies for the filthy rich. That’s because the eco-friendly boat is priced at $250,000. According to makers, “it is a first-of-its-kind, ultra-luxury commerce environment that immerses you in the world of DC’s Bruce Wayne, the billionaire civilian persona of The Batman.”

The limited-edition watercraft is a balanced iteration of luxury and high-end technology for the best experience venturing out in the waters. Only 27 units of this vessel will be created by T3MP3ST who have been redefining nautical adventures with innovative Electric Exploration Vehicles designed for the government agencies and the elite.

Designer: T3MP3ST and Wayne Enterprises

The 4-meter power boat is designed out of carbon fiber and stainless steel to optimize performance without harming the environment. The use of these materials keeps the total weight down to 1,300 pounds. The power comes from a 100 kWh modular battery that’s mated to a 350 hp electric motor. This enables it to reach speeds of more than 85 mph and have a range of 75 miles on a single full charge. That roughly equates to around six hours of runtime. The watercraft is loaded with an autonomous navigation system that has Garmin’s advanced GPS and voice command integration compatible with iOS and Apple Watch.

This EEV comes with high-grade customization to suit the needs of demanding buyers. It is crafted for a four-seat configuration just like a jet-ski, keeping in mind Batman and Robin would hop onto the ride whenever criminals decide to fox the authorities by taking the water route. Plus there’s space for two more to add to the fighting power. If buyers want to have more seating space, the company is also offering a larger version with a 30-foot RIB hull that can ferry 8 passengers. Top speeds on this one are considerably lower at 40 knots but it can cruise for eight hours on a single charge.

Those interested in buying the Maverick GT Stormy Knight luxury boat can head over to the BruceWayneX website for pre-order, or mark their calendars to visit the Wayne Enterprises Experience in New York City from June 3 to 10.

The post Batman-inspired Maverick GT Stormy Knight redefines luxury and sustainable maritime adventures first appeared on Yanko Design.

Liking for retro game-inspired handhelds has surged in the last few years, thus, prompting proactive manufacturers to catch up on the trend. Anbernic is not letting this opportunity go with a variety of gaming handhelds including the RG35XX H, RG353P, RG35XXSP, and the RG556 (very unconventional naming conventions has to be said) already released this year.

Add to that lineup the latest RG Cube which comes loaded with a Unisoc T820 processor, capable enough to play titles from the Nintendo 6 and Dreamcast. According to the company, it doesn’t stop there as the handheld should also play select titles from the PS 2, GameCube, Wii, and Nintendo 3DS in emulation mode.

Designer: Anbernic

The cute Android 13-powered gadget has a 3.95-inch IPS touchscreen (720×720) with a 1:1 display ratio which to be honest should affect the visuals in some of the newer titles. The octa-core processor (maxes at 2.7 GHz speed) mated to 8GB of LPDDR4X RAM is supported by an 850MHz GPU capable of producing 1080p resolution visuals at an impressive 120fps. The buck doesn’t stop there as RG Cube has 128GB of UFS 2.2 storage with expandable storage of up to 2TB via a MicroSD card.

For extended gaming hauls, the handheld boasts a battery life of 7 hours courtesy of the 5200mAh battery life. The in-built fan provides active cooling when things get too hot. Most gamers should love this compact gaming player since it has RGB lighting effects, a gyroscope sensor, a vibration motor, D-Pad input, action buttons, shoulder triggers, and Hall Effect joysticks that should last long without any malfunctions. Playing classic games on this one will be a treat with the stereo speakers in-built, USB-C port, and a 3.5mm headphone jack for purists.

Anbernic has not announced the pricing or release date of the gaming handled yet or the pricing. At launch, the RG Cube will come in three color options: Beige White, Radiant Purple, and Gray.

The post Anbernic RG Cube is a Cute Retro Handheld with Game Boy-inspired Square Screen first appeared on Yanko Design.

Of course, when the best in the business come together the result is absolutely impressive. Add to that specifications and ideas cooked for a defined regional dominance and it is bound to have some waves riding its way. Case in point the new Bedrock XT2. It is made especially for the US and comes out as an impressive and luxurious truck home for the overland expeditions you will plan later in the year.

Coming back to the story lede, the Bedrock XT2 is the result of an amalgamation between two stalwarts – Krug Expedition and Artic Trucks – of their own device. The former, an Austrian business, brings decades of experience in building expedition-level trucks while the latter adds a spice of polar transportation to it, giving us an off-road camper that’s robust, comfortable, and spacious; name it and your wish will be granted.

Designer: KRUG Expedition and Artic Trucks

Designed to sit on the bed of the amazing AT44 XT2 Ford F-550, the Krug Expedition Bedrock XT2 off-road camper is positioned on a next-level suspension and chassis that’s made for reliability. To put that into perspective, the Artic Truck’s massive custom ride comes with a three-axle, 6×4 off-road drivetrain and eight-link air suspension so you are never left stranded in the middle of nowhere with a vehicle breakdown.

This home on the road meant to ride you back home without hesitation, sits on an 8.4m long base, and makes things really intriguing with the option of its removable living module. On the inside of this hard-shell, reinforced sandwich panels exterior of the gooseneck-like camper lies a space you can associate with road luxury. The insulated living area is dressed with a king-size bed, dining/sitting area that converts into an additional sleeping nook, a full-fledged bathroom with shower and water storage, and a high-octane L-shaped kitchen for cooks with a Nespresso coffee maker for a bean pod-like me.

On board the off-road camper is a 23kW hour battery, which draws power from the 1450W rooftop solar panel, and can power the pickup camper’s power requirement when the HVAC system stops/or is not running on diesel.  Besides the entertainment needs in-house are taken care of by a smart TV, connected to the Starlink internet, in the living section. As an add-on, the company can provide the Bedrock XT2 with a pullout outdoor kitchen, options for wood veneer finish, and leather upholstery for seating indoors.

The post Krug Expedition Bedrock XT2 off-road camper is ultimate partner for overlanding journeys in the US first appeared on Yanko Design.

Working overtime and getting home late almost every day to find your dinner cold and unsavory? I’m sure a family member or your spouse has to wait through the night and then serve you hot food. It’s still fine on hot summer days, but the long winter nights can really get tough for everyone; you cannot have a cold meal at all! Hot plates have been a solution to this culinary conundrum through the years. But traditional warming boards only add bulk to your kitchen and do not do much to your meal.

What if you could have piping hot dishes on your table without taking up extra space? Whether you’re working late or hosting friends, the idea of a hot, delicious meal awaiting you at the table is a sublime feeling for many, including the designer of this electrically powered, folding and detachable heating plate that would be your biggest help when you’re hosting family or friends at home, partying at the pool, or out camping with your pooch.

Designer: Wenhua Xu

Conceptualized with the simple idea of ensuring a warm, delectable meal every time; this hot plate in pastel colors, functions on rapid heat transfer technology to ensure your food is at an ideal temperature, and it is constantly heated to maintain it as long as you want. The construction material of this heating board is anyone’s guess at the moment but from the images, it is easy to confirm that it is safe and easy to clean.

Besides, the overall concept – with an adjustable control panel – excels in heat retention. It helps preserve your food’s warmth and flavor with its three different temperature settings, keeping the heat maintained for almost eight hours. Interestingly, the warming board is ideal for heating dishes, milk, and drying food – all ensuring a delightful dining experience.

Add to that the convenience of detaching the three individual heating plates that comprise the entire unit. It can be used together or separately – thanks to the tri-folding design – to work with metal, ceramic, glass, or enamel utensils, serving bowls and other kitchenware. You can pack it in the bag for travel convenience, simultaneously warm up to six dishes, and keep the food warm and fresh every time. This portable and detachable marvel can be effortlessly stored to maximize space in your kitchen.

The post This compact, detachable hot plate is designed for on the go convenience and ease of storage first appeared on Yanko Design.

Unless you are Elon Musk and believe chess is “too simple to be useful in real life,” you know, chess is a strategic and competitive game. It requires meticulous planning and clear objectivity. If you don’t have an objective in mind, your moves will be directionless and you will end up wasting time thinking and moving without purpose. Through the gameplay, it instills cognitive thinking, benefits mental well-being, and can now be a source of thoughtful restoration in the war-torn Ukraine.

Cuibiono, a design-first not-for-profit, has been at the forefront of providing aid to the regions where geopolitical conflicts like war have damaged humanity. With the new chess set, it has conceived using recycled biomaterials (PLA) and 3D printing, the NGO is giving everyone a chance to jump onto their journey of creativity, sustainability, and giving back, helping make a difference and restore homes in Kharkiv, Ukraine.

Designer: Cuibiono

The stackable chess set is inspired by the war-torn and displaced Kharkiv, which has been on the receiving end of the Russian invasion. Called the Kindachess – S, this set 3D-printed from naturally degradable bioplastics – features a board segmented to depict the nation under war. It is designed as fractures on the earth’s crust. But when it’s stacked to be stored, the dividing lines on the board form the Ukrainian flag to depict unity and the satisfaction of returning home.

The idea of a chess set whose profit from sales proceeds would go into restoring homes in Kharkiv is the brainchild of designer Liam Hwang of Cuibiono. The compact, stackable chess set is 3D printed sustainably in Hackney, London. It measures 200mm x 200mm when laid out for playing and fits into a case measuring 290mm x 164mm after use.

This is not Cuibiono’s first such sustainably driven product with the idea of giving back. The NGO states, “we are committed to sustainability.” All the products designed in their facilities are crafted with eco-friendly materials (like recycled PLA in the case of the chess set). The chess set, selling in two color contrasts: wheat and sky, ivory and walnut, is now available at £200 (approximately $250). Buy now, and support the cause becoming a part of the community that cares.

The post 3D Printed Chess Set pays respect to the Ukraine invasion with a poignant war-themed design first appeared on Yanko Design.

All Lord of the Rings fans should get excited about the new LEGO set themed on Barad-dûr, Sauron’s iconic stronghold. The 5,471-piece set features the sinister tower topped with the Eye of Sauron, the disembodied eye that overlooks his evil domain. Those who’ve watched the movie will instantly remember it as the “giant black tower with the flaming eye on top of it.”

This set will come at a price tag of $500 with availability to commence from June 1 for LEGO Insiders and from June 4 onwards for other buyers. The Barad-dûr tower will have four main sections – a prison, armory, throne room and a kitchen. Those who’ll get their hands on the set on or before 7 also get the complementary 269-piece Fell beast set with posable wings for the intimidating flying creature and the Nazul minifigure.

Designer: LEGO Ideas

The 32.5-inch tall and 11 inches wide Barad-dûr set has references to the movie in the form of Easter Eggs filled inside the interiors. Minifigures including Sauron, Mouth of Sauron, Sam, Gothmog and Orc also grace the build. Sections of the set include a pair of mechanically operated front doors and a dark throne that hides the secret room of the Palantir. There’s a forger for sharpening the weapons of destruction, a lava pit with a suspended skeleton cage and feasting for orcs. The top of the tower opens to reveal the throne room with a hidden map and ladder to access the top floor. In the middle of the structure is the feast table and orc armory. At the bottom of the tower, there’s a working door.

Frodo is not forgotten with the stolen Mithril coat and the hidden map, while Shelob has a tiny spider to complete the details. Interestingly the LEGO set can be stacked with more modular pieces to increase the height of the already towering structure that is even more impressive (and taller) than the Rivendell set which is the last official Lord of Rings set by LEGO. The tower is topped by a replica of the Eye of Sauron having a light-up brick to cast a subtle glow in your den.

The post Barad-dur LEGO set brings Sauron’s sinister tower from Lord of the Rings to your work desk first appeared on Yanko Design.

Mercedes-Benz has been a name synonym for panache and luxury ever since it was first established in 1926. Headquartered in Stuttgart, Germany, the automotive giant has set the bar high for four-wheelers of the present and the future world. The AMG GT introduced in 2014 is still one of the most liked supercars in the industry and Concept VISION AVTR is setting the precedence for electric cars of the future already.

While the brand is one of the few big names inclined towards electric concept designs, it is understandable how many concept designers gravitate towards the Mercedes name for building their imaginative four wheels that could someday actually land them at one of the renowned brand’s design nests. The Mercedes-Benz Dresscode is one such iteration that has a unique take on what a British hypercar of the future could be like.

Designer: Jeongtae Lee

The design direction of the car interprets iconic luxury through the shapes of collar and rich volumes of a formal dress. If you look closely the hypercar adapts the form of a white shirt with a tie on top and a black jacket layered over it. Yes, the white sections represent the shirt with edged surfaces while the black body wraps the entire car in a large volume reminiscent of a jacket. The rear of the vehicle is like the back of a person wearing a suit – simple and chic. Unlike other supercars having luxurious gull-winged doors (or scissor doors) which can be tricky to get in and out, the Dresscode concept has doors designed to feel like the process of taking off a suit which is elegant and easy.

The side profile of the car is inspired by the seam lines on the shoulder of a jacket, wherein the lines flow from the front to the rear. Those wheel parts are rotatable through these lines. Also, the seam stitches on the shoulder of a suit jacket are reinterpreted as Mercedes patterns on the hypercar. In a true sense, this is a tailored Mercedes concept maintaining an aggressive yet elegant stance with its dynamic shape.

The post This tailored Mercedes-Benz hypercar concept adapts the volumes of a classy suit for its dynamic shape first appeared on Yanko Design.

Polestar as an electric car manufacturer has taken the heat to Tesla in the last few years. The Swedish brand has proved its metal with the Polestar 2 EV, even when stacked against the Tesla Model 3. There’s a whole lot to like and the brand is evolving in the right direction.

The Polestar 6 slated for production in 2026 as an open-top grand tourer has got the challenge very well accepted for future dominance, at least in the electric roadster domain. We though, are always on the hunt for something larger than life in the concept world. Just like this Hot Wheels-inspired Polestar hot rod that would be perfect for the Japanese street racing scene.

Designer: Henrique Alves

This electric concept named Polestar Fenrir imagined for the 2024 Polestar design contest hits the nail right on its head with the Hot Wheels theme. That’s because the contest is done in collaboration with Hot Wheels. The only doubt in Henrique’s mind was if the vehicle should be a Monster Truck, Surf Van or Dune Buggy. Ultimately he went for the obvious choice of a hot rod, since Hot Wheels is all about cool street racers. The idea was to fuse the Hot Rod DNA to a modern electric car aesthetic that the designer creatively achieved with the form.

The contours are maintained at the right places while the heavy influence of an EV is not ignored at all. Muscular element also follows in with a forward-leaning stance that’s exemplified by the fat rear, both in the body and the size of the wheels. This broadening stance from the front to the back makes space for a unique two-seater configuration. The low ride height barely enough to slip through a sheet of paper means the hot rod will have to avoid any bumps or speed breakers.

The designer expresses the creation as a 2-seater hot rod with some goofiness and playful feelings. He adds that the Polestar Fenrir is a well-proportionated EV racer with minimal lines and shapes that complement the Polestar’s visual identity. Surely we second that thought and a Polestar concept of the future could draw inspiration from this model.

The post Polestar Fenrir is a sophisticated electric hot rod straight from the Hot Wheels universe first appeared on Yanko Design.

Purist audiophiles always come back to the DAPs and high-resolution audio players to enjoy their favorite music collection in high definition. Sony has a foothold in the hi-res audio game for as long as memory goes back, and they continue to offer some of the best players for music listening. Walkman MW-A306 released last year is a favorite one for music lovers.

Teenage Engineering resonates the same value for its consumers with a broader portfolio of innovative and unconventional audio gadgets. Both Sony and TE have things like modern design, Gen-Z targeting and sublime quality at their helm to attract a niche set of audio lovers. We certainly love TE and so does the community of designers who have been mustering up cool concepts inspired by the Stockholm-based electronics company. If you’re a purist audiophile, this portable CD player with built-in speaker is a must-have addition to your collection.

Designer: Evgeniy Vakulich

This cool concept of collaborating together the two loved brands is surely going to bring the heat to the likes of Astell&Kern, Fiio, iBasso and Shanling. Interestingly called the Pony Project, the DAP has the design DNA and color theme of Teenage Engineering. It gets a digital display to show the currently playing music and library elements to search for tracks. All the other buttons for toggling the elements like the tempo, loop, mode or FX. The tactile input for the L-Shift, R-Shift, Mic, Select and Start is heavily inspired by the Teenage Engineering aesthetics.

The top of the gadget has the volume rockers, bass and treble, power and stop buttons. A lot of mind has been put into the design and conceptualization of the music player by Evgeniy. The popular color theme of the TE products is so good to see in a DAP which usually comes in contemporary dark hues. If you’ve already not noticed, the audio player comes with the Pony branding which dupes the Sony brand name.

The post Hi-fi Audio Player inspired by Teenage Engineering and Sony refreshes an age-old design first appeared on Yanko Design.

We are still living with the iPhone 15 and its variants; the era of the iPhone 16 is further away from now. As known, it’s customary of Apple to drop its new seedlings (iPhone variants, if you like) in September every year and it looks like there is nothing unusual this year as well. Like every other year in the past, since Steve Jobs revealed the first iPhone – feels like it was a century ago – iPhone 16 and iPhone 16 Pro variants will arrive with new features.

A lot of them are leaking in bits and will continue to do so until the launch date. Irrespective of that, we will continue to have our own wishlists: long battery performance… please, elaborate AI integration into the iOS, and perhaps smaller screen real estate…hmm! When everyone else is putting their money on predicting the possible large display sizes of the iPhone 16 Pro Max, the Phone Industry is taking an ‘S’ route: A concept of an iPhone 16S that looks to take design cues from the Rabbit R1.

Designer: Phone Industry

For reference, the Rabbit R1 isn’t a typical gadget, and so is not its design. The boxy little AI device is designed to learn from your commands and do more than what the average smartphone can do. That is until the recent debacle of reviews that are showing that the real-world evolution of the Rabbit is far from its advocated details. Anyhow, this is not about what the Rabbit R1 does, it’s about the identical-looking (minus the hold bars on the top and bottom) iPhone 16S concept because the best AI device you can have in your pocket – in the foreseeable future is a phone!

Perhaps then the form factor of the concept phone in question may be stolen from the Rabbit R1, it does have some interesting ideas reliving its iPhone 16 identity (as the rumors hold it for now). The iPhone 16S is taking the expected Capture Button idea from the forthcoming iPhone deals, to give us a pocket camera-like physical clicking button from the yesteryears.

So, the hypothetical capture button on the opposite side of the iPhone 15 Pro like the Action Button, gives this iPhone a more camera-like feel. While Apple is considering on reworking the camera array in the upcoming iPhone 16 lineup, this concept sticks to the S series iPhone basics and uses just one – obviously multi-capability – camera in the rear. The highlight for me – besides the square form factor – of the iPhone 16S concept is its all-metal body and an interesting pattern around the Apple logo on the back. What do you think?

The post iPhone 16S concept mimics the Rabbit R1 format to reinstate that a phone is the best pocket AI device first appeared on Yanko Design.

Rooftop tents have their market. Most developers understand the demand and are leaving no stone unturned. To that accord, we already have double-story pick-up rooftop tents ruling the roost. But what if you don’t have a pickup? iKamper has been in constant hustle to give us (those without pickups) reasons to explore, not only as a couple but even stretch the exploration experience to a group of friends or a family.

After the success of the Skycamp 3.0, iKamper is now including some customer-preferred aftermarket accessories into their new fold-out rooftop tent that should elevate the camping experience for many in more ways than one. Dubbed the Skycamp DLX (deluxe, if you may) follows the similar design language of its predecessor with a black finish and hardshell body and then adds to its some features like LED mood lighting, inflatable comfortable mattress, and cork flooring to give us the ultimate, four-person rooftop tent.

Designer: iKamper

The deluxe rooftop tent is basically a hardshell rooftop tent during the day and when popped up open, it reveals a whole lot of living space for an entire family. It comes with a Rocky Black textured matte black fiber-reinforced shell and features a strong aluminum honeycomb base, on which iKamper has installed cork flooring for better insulation and noise-proofing. The pop-up contraption is defined by heavy-duty fabric that complements the durability and style of the hardshell.

Interestingly, the Skycamp DLX is a four-season rooftop tent that unfolds to double the living/sleeping area while remaining compact in the drive mode. Its versatility is enhanced by its compatibility: the roof tent is compatible with most vehicle types with a mounting system that allows it to mount onto most cross bars and roof racks. Adding to the durable form factor is the full black-out privacy to keep your space sleep-worthy, unless you want the light to penetrate in, and has ample interior storage to store the bedding and other essentials.

For the natural light to fill the space well and ensure ventilation, the rooftop tent has multiple windows and a skylight. The best however is reserved for the evening when the integrated, colored lights can light up the tent interior as soon as it is connected to the USB port. LED light strips are also installed on the outside, to light up the ladder and entry. These lights have different color and illumination variations, controllable from the remote control onboard.

Once the evening has set, the lights are ready and glowing to your mood, and it’s time to hit the bed; you can inflate the mattress within (using the provided pump) and comfortably doze off to get up fresh for a new day of exploration. For those interested, iKamper is offering the Skycamp DLX in two configurations. The starting price for the four-man Skycamp DLX starts at $5,150. The Skycamp DLX Mini, a two-man rooftop tent option will set you back by $4,450.

The post iKamper Skycamp DLX four-person rooftop tent arrives with LED lighting, inflatable mattress, and cork flooring first appeared on Yanko Design.

If you’re someone like Martina of YouTube channel Nerdforge, who craves a cup of coffee after lunch, or maybe during work, you don’t have to get up and hit the kitchen anymore. Martina has built herself a PC case mod that brews a perfect cup of coffee with the touch of a button. And if you’re an ardent coffee buff, she has a detailed video on how you can try and build a PC that also makes coffee in a quick and efficient manner.

This PC with a built in coffee maker brews and dispense a hot cup of coffee whenever you want, but the process of building it from scratch hasn’t been easy. The idea started with, what if there was a coffee maker installed right into the PC, you wouldn’t have to get up and fetch a cup when you wanted it after lunch. And so, the modification started with the empty Corsair Obsidian 1000D tower case, which was considered big enough to fit the coffee machine.

Designer: Nerdforge

The humungous PC case was needed because Martina did not want to install a pod coffee maker. She wanted the entire machine: from bean grinder to brewer and dispenser, all-in-one, functioning glitch-free on a press of a button. The PC case was first cleared of the side panels and obstruction on the right where the coffee mug would need space to move in and out. Then the bean grinder was first trimmed to fit into the case with 3D printed pipes, funnels and attachments connecting it to the brewing machine.

Martina removed the coffee container from the dispenser to replace it with a mug that could be easily accessed by the user. Once the hardware was ready, the recreated coffee machine was connected to an Arduino (by Martina’s partner Hansi) to be able to control it using just one button. The machine grinds, brews, and dispense a savory cup of coffee in one breath, with all the precision. The duo has added a visual progress bar to see where the coffee making process has reached. Also, provided is a sensor that ensure the coffee never begins brewing until there is a cup in the holder.

Although everything in the video is all about the installation of the coffee machine in the PC case, it has been fitted with capable innards to deliver computing needs. It comes installed with Intel Core i7-14700K processor and an Nvidia RTX 4070 Ti graphics. Other details are scanty, but the PC is air-cooled to ensure it can keep the temperature on both – coffee machine and PC – sides effectively cooled. Finally, for an impressive and aesthetically pleasing look, Martina decorated the case mod with stained wood on both the inside and the outside, and finished the look with LED lights.

The post YouTuber custom builds coffee machine into a PC for freshly brewed cup of Joe at work first appeared on Yanko Design.

Inspired by the future of sports cars, the original Amida Digitrend was way ahead of its time when it was introduced in 1976. It was well accepted as a driver’s timepiece, but did not make a significant move in the watchmaking world then. Yet, as the legends would, after almost five decades, the watch is making a time-relevant revival in the limited “Take Off Edition.”

Conceived to mark the 50th anniversary of Amida Digitrend’s original model, the Take Off Edition is an amalgamation of heritage and nostalgia. Marking some clever, modern, consumer-centric watchmaking nuances, like the mechanical movement, all steel case, and sapphire crystal prism for display, the watch is a result of the dramatic commitment of a team of enthusiasts including watch designer Matthieu Allègre.

Designer: Amida

The reimagined, modernized version of the new Digitrend functions on the same principle as the OG. It may have the manually wound mechanical movement replaced with an automatic movement i.e. a Soprod’s Newton caliber offering 44 hours of power reserve, but it retains the unique time-telling mechanism that allows a diver to see the time without having to lift the hand from the steering wheel.

For this, the watch has the usual horizontal, dual hour and minute discs, which using the sapphire crystal prism for the display show them vertically; the prism even helps magnify the vertically presented digital numerals for better legibility. This atypical display of the Amida Digitrend is a result of its unusual case shape inspired by classic sports cars and modern architecture. To that accord, the car-body-like case of the Digitrend is made from a block of 316 L stainless steel. It is sleeker – measuring 39mm across – than the original yet maintains a retro-futuristic vibe to it.

The steel casing is overly opaque revealing nothing more than the dashboard-style time display and a winding crown on the side. On the left side of the display are the jumping hours and the trailing minutes are visible in the right corner, with Amida Digitrend typography taking up the center space. The caseback is visually interesting with a serial number for the Take Off Edition, a rocket art, and a see-through window showing the new movement in its entirety. The new Amida Digitrend watch, is set to be available for preorder starting May 28 (delivery to begin in October). It comes paired with either a charcoal Alcantara strap or an orange-colored calfskin strap with a stainless steel buckle.

The post A driver’s delight – the Amida Digitrend makes resounding comeback after 50 years first appeared on Yanko Design.

‘There is no friend as loyal as a book,’ but the benefits of reading and the entire idea of owning books are taking a back seat nowadays. The shift of entertainment forms to digital speeds has made our free time busier and immersed our reading hours in reels. The biggest sufferers of this neglect and transformation are kids who remain devoid of bedtime stories and instead are fixated on the screens, swiping through reels and videos with little quality to improve concentration or cultivate the habit of reading.

Taking advantage of all the benefits of reading is essentially impossible going forward. Of course, some parents have managed to keep the routine of reading bedtime stories to their kids; it’s really not a norm anymore. Chishu audiobook player was idealized to help children relive the losing charm of someone reading stories in bed to them. And following the humble recognition of the concept, it is now reimagined with new colors and approach.

Designer: Chanie Liao

Enter Chishu 2X audiobook player, a humble, handy device that wants to improve children’s concentration and cultivate in them the habit of listening to books, at least. The pocket-sized player, equipped with a specially designed story card, is tailored for children below the age of 12. A child can insert the card in a dedicated slot, tune the player to their audio liking, and play the story content while being engrossed in some secondary activity or playing.

The curved, interactive design of the Chishu 2X shortens the distance between children and the audiobook player, making it their storyteller capable of ‘immersing them in the world of stories’ at an early age. To make it more adaptable amid the little ones, the device comes in various base colors. However, each functional area on the device – the story card slot; volume rocker; skip next knob; and the speaker grill – all come in different color options, making the entire package fun to hold and playful to interact with.

Taking of interaction; the little window display in the top right, where the story card slots in from the top, kids can keep tab on the story they’re listening to. The speaker system of the new Chishu 2X has been upgraded and embedded within a lighter and more drop-resistant molded metal body, rendering the device suitable even for older children and young adults to explore.

The post Chishu 2X is a modern granny designed to read bedtime stories to your tiny tots first appeared on Yanko Design.

Casio G-SHOCK watches have set a new precedent in durability, functionality, and material design. It is a preferred choice among people who indulge in extreme activities or work in rugged environments, owing to its ability to withstand extreme conditions and live through all the beating. The G-SHOCK wristwatches are unbelievably tough and the brand’s continuous efforts to keep the standard and reliability unchanged have only worked in its favor.

Now in time for Earth Day on April 22 and to make environmentally conscious individuals a fan of its incredible robustness, Casio has released G-SHOCK G5600BG-1 made from recycled resin. The limited-edition watch, made essentially to mark April 12, the birthday of G-Shock, comes with a bezel and band made using recycled resin waste.

Designer: G-SHOCK

Resin has been the go-to material for G-SHOCK watch straps for years now. It has been majorly used because of its properties to withstand shock, and for being lightweight, water resistant, yet looks modern and stylish. Being overly used, resin is generally left over in the production lines, which now by recycling it for watch material, Casio is giving a new lease of life to the otherwise waste material.

The recycled strap material, available in a combination of black, red and yellow colors is made by kneading red and yellow waste resin from classic G-SHOCK in a matte black base to create a unique colorful pattern. This new repurposed resin is used for the construction of the bezel and strap of the G-SHOCK G5600BG-1. The new watch is available in a multicolored pattern and color tone, which Casio informs, may change in every individual watch due to the characteristics of mixed material color of resin.

Furthering the eco-conscious behavior, beyond reducing the environmental impact of resin waste – which would otherwise be discarded – the G5600BG-1 comes with Casio’s Tough Solar technology to keep it charged with the use of sunlight. The watch is G-SHOCK quality robustness is shock-resistant and 200-meter water resistant.

Featuring a case measuring 46.7 × 43.2 × 12.7 mm, the G5600BG-1 weighs only 47g. It comes with 5 world time and 31 time zones, LED backlight, auto calendar (to the year 2099), alarms, stopwatch and other G-SHOCK basics. Casio adds more environmental-friendliness to the $150 G-SHOCK G5600BG-1 with its packaging, which is again made from recycled materials.

The post G-SHOCK G5600BG-1 is made from recycled resin sourced from waste in the production of Casio watches first appeared on Yanko Design.

Pens as a writing instrument have stood the test of time and they’ll be timeless accessories for eternity. Those who cherish the joy of writing down stuff with their fountain or rollerball pen always appreciate the idea of investing in a quality option. The unique writing experience these writing instruments offer is unmatchable, making them a must-have everyday carry.

If you also love keeping a fountain pen handy, the Submarine Collection by TaG will interest you. The submarine-shaped fountain pen edition is developed in collaboration with Hou Xin-Yong, a highly experienced calligrapher with over 2 decades of expertise, and Lee Tai-Ying, the founder of a fountain pen club in Taiwan.

Click Here to Buy Now: $100 $145 ($45 off) Hurry! Only 10 Days Left. Raised over $130,000

The heart of the solid brass fountain pen is its ink-filling mechanism which is second to none. Simply dip the pen’s tailormade black PVD stainless steel nib from Schmidt (you can also choose the gold-plated nib version) into the ink bottle and turn the knob at the top, it’s as easy as that. The weight balance of the writing instrument makes it a treat to use for long writing sessions and ensures natural movement of the hand across the paper. This is attributed to the anti-slip tapered fiber grooves around the pen for a secure grip and tactile dimension to the whole writing experience.

To make sure, there is no ink leakage like other conventional friction-free converter structures, the pen has an internal treaded structure between the converter and the pen’s outer shell. At the top of the writing instrument, the turbine-inspired cap element complements the streamlined design aesthetics of the pen. According to TaG, the fountain pen is crafted with precision as every detail right from “the choice of premium materials to the aesthetic appeal, has been thoroughly considered for a creation that is functionally and visually pleasing at the same time.”

If you are more oriented toward the rollerball pen option, the makers have a compelling option for you. The Submarine Rollerball Pen has the same sleek design and the signature turbo-filling mechanism. It comes with a Schmidt rollerball tip that moves on the writing surface like butter. Both these writing instruments are in a league of their own with massive crowdfunding already, surpassing the goal by a humongous margin. If you already fancy the idea of buying one you can pledge the fountain pen for $109 and the ballpoint pen for $100.

Click Here to Buy Now: $100 $145 ($45 off) Hurry! Only 10 Days Left. Raised over $130,000

Click Here to Buy Now: $100 $145 ($45 off) Hurry! Only 10 Days Left. Raised over $130,000

The post This fountain pen makes creation flow on the writing surface, comes with turbo ink filling mechanism first appeared on Yanko Design.

Sim racing is the best way to showcase your racing or gaming skills if you didn’t make the cut to the big league. Serious gamers always want to invest in a racing simulator that takes them one step closer to intense wheel-to-wheel action. Depending on what’s the final budget, these rigs can be anything from a desk-mounted setup costing $300, a chassis for a few thousand, or a full-blown motion simulator costing $50,000 upwards.

If you’ve got a stack of money to spare you can go to another level though, with a sim rig that professional racers opt for. Along the same lines, Pagani has unveiled their Huayra R Driving Simulator which is designed in collaboration with Racing Unleashed, who are known for building some of the best high-end racing simulators out there.

Designer: Pagani and Racing Unleashed

Attention to detail is the key in this racing sim as it took more than a year to finalize the creation process. This racing simulator crafted at Pagani’s facilities is made out of a single piece of aluminum and adorns carbon fiber used in the original Huayra R supercar. The car’s dynamics right from aerodynamics and handling to the sound of the naturally aspirated V12 engine are replicated to millimeter precision. The seat belts, pedals, seats and steering wheel are identical to the ones on the real car.  Wait there’s more… it also has air vents to release the brake and engine heat, making it one hell of a racing sim!

According to Franco Morsino, Vehicle Dynamics Lead at Pagani, “Our goal was to transcend the traditional boundaries of virtual driving, offering an unparalleled level of realism and immersion. This simulator is not just about the experience but also serves as a piece of art, reflecting the unique essence of Pagani’s design philosophy.” Pagini will only offer this racing sim to Pagani owners to test and compete with their powerful machines on FIA tracks in virtual reality. Taking realism to the next level, the sim can also be run in conjunction with a VR headset. Otherwise, the racer/gamer can opt to race on the single curved ultra-wide Samsung G9 monitor. Apart from the Huayra R, the simulator also gets the custom physics-focused version of the Assetto Corsa.

Pagani has not revealed any details about the pricing but given its level of realism and design uniqueness, it should very well run into a $100,000 (or more) price tag. On the hind side that’s way less than the track-only Pagani Huayra R costing $3 million.

The post Eye-popping Pagani Huayra R racing simulator matches the real thing in every little detail first appeared on Yanko Design.

Portable computing demands convenience! This objective has allowed an entire PC to be stuffed into our pockets already. Yet, there is no comparison to the suitability and convenience of a laptop. LG ensured laptops remain the most versatile device for all creative needs with the birth of LG Gram ultra-lightweight laptops. Now, designers believe there is a scope to transform LG’s innovation into an optical illusion.

Of course, the major inspiration for the idea of the Illusion screen is the LG Gram laptop. For me, however, it is reminiscent of a transistor from the era gone by courtesy of its carrying handle and a nice metallic sheen. The Illusion screen laptop is a concept design created by KDM+ through LG Electronics’ industry-academic cooperation project.

Designers: JiHoon Park, Sherry Ahn, Dahyeon Kim and Korea Design Membership

A laptop has reformed the way we work today, essentially merging the previously separated digital experience of desktops. As laptops are the daily drivers of the workforce, the Illusion screen provides a reimagined design that allows the display to disappear into the clamshell design. Taking up a little space on the desk, the Illusion laptop presents configurations and styling options to complement our lifestyle and working requirements.

Chances are the transistor reference would resonate with you too. It appears similar with a unibody design – wrapping up an illusionary display on the front and leather cushioning on the back – extending to the carrying handle on top and a nice tuner-style knob on the right. The highlight is the illusion graphics on the screen that continuously play as moving water droplets or color patterns at different screen angles.

With its interesting modular screen, which can be used at any angle from 0 to 90 degrees and in between, the Illusion laptop is usable in any position the user desires. With that versatility, it opens up a range of use cases on your desk to be used independently (with a magnetic Bluetooth keyboard that resides within in clamshell mode) or with an external screen to enhance your creativity.

Since the LG Illusion screen emphasizes portability and convenience, it comes in this handbag-like form with its handle so you can carry it around like a briefcase without additional casing or luggage. The knob on the side is basically for adjusting the screen angle so you can consume different content at different display orientations. On the bottom of the leather cushioned back panel is the speaker grill of the Illusion laptop while on the top are vents for air. The laptop with the captivating optical display has various connectivity ports on the sides, but there is no word on the specifications one will get in this LG Illusion screen.

The post This ‘PC in a briefcase’ reimagines the LG convertible laptop as an optical illusion first appeared on Yanko Design.