If you wish to again play games on your Nintendo console with the GameCube controller that has damaged wires and bad instances of drifting analog sticks, then this accessory arrives as a blessing in disguise. 8BitDo has introduced a mod kit that lets you upgrade your GameCube controller to a wireless gamepad, so that you’re not impulsively tempted into buying a new one.

This is not the first time 8BitDo has introduced a mod kit for the Nintendo controllers including the N64 and earlier ones, so this comes as no surprise. The trick here is that you’ll have to replace the existing PCB of the NGC controller with a drop-in board. The Chinese tech company is taking pre-orders for this useful gaming accessory that’ll make you go wireless if you hate the wire clutter on your Nintendo ecosystem. Called the NGC Mod Kit, this one is slated to ship on 25^th September.

Designer: 8BitDo

You’ll need to have basic soldering knowledge and loads of patience to make the changeover. Remember, controllers are not that easy to put together when opened up. Although not as tedious as putting together something like a DualSense. Of course, there are certified adapters on the market (including 8BitDo GBros and Nintendo’s official adapter) that allow you to use the wired GameCube controller with the Switch but this mod kit cuts out the extra and brings straightforward wireless Bluetooth connectivity.

Along with making your gamepad wireless, there are other add-ons as well. It has Hall effect joysticks for improved lifespan and immunity against sensitive vibrations if you love to play your FPS games hard. The accessory adds a 300mAh USB-C rechargeable battery with 6 hours of playtime for gaming without interruptions. It also adds a new set of triggers to the controller, so basically, you’ll have a virtually new gaming controller to play around with.

8BitDo Mod Kit priced at $26 is worth the spend if you have a Nintendo GameCube controller with chewed-down wires and defunct joystick controls. The only catch is, that you’ll have to slash out another $26 for the Tetro Receiver for GNC to connect to the GameCube. So, spending $52 on a wire-free setup for your existing NGC controller makes logical sense.

The post 8BitDo’s Mod Kit turns wired NGC controller into wireless one with Hall Effect joysticks first appeared on Yanko Design.

PC gaming has experienced a huge boost thanks to the advent of handheld gaming PCs like the Steam Deck, the ASUS ROG Ally, and the Lenovo Legion Go. But while these offer a more mobile gaming experience, they still pale in comparison to dedicated gaming laptops when it comes to performance, battery life, and heat management. Gaming laptops have been around for years, of course, but they, too, are experiencing a renaissance, whether they’re becoming slimmer and sleeker or, in this case, taking on a completely different design. Rather than completely overhauling the laptop or even doing away with it, the Acer Project DualPlay concept instead transforms this familiar design into something that adapts to the latest gaming trends, including playing the same game with a friend who’s right beside you.

Designer: Acer

The days when PC and console gaming camps were divided across keyboard or controller lines are long gone. Those on PS5 and Xbox now feel the need to grab a keyboard to communicate with friends, while some PC gamers now swear by gamepads, especially those playing on handheld PCs. The trends may have changed, but the design of gaming laptops has not caught up to this shift, which is why the Acer Project DualPlay concept changes the formula a wee bit by embracing both playing styles in the same device.

When you press a certain “release” button on top of the keyboard with two fingers, the laptop’s extra-large touchpad pops out and becomes a wireless controller, not unlike those you’d usually connect and bring with you in a separate case or pouch. This dual system lets gamers quickly switch between keyboard and controller without missing a beat and without having to worry about forgetting to bring the controller or having no space for it in the bag.

“DualPlay,” however, has dual meanings here. That detachable controller can actually be separated into two joysticks, not unlike the concept of the Nintendo Switch Joy-con, allowing two people to compete or cooperate in the same game without having to fight over the controls. It brings back the social feeling of playing with someone beside you that home consoles offered, except you’re no longer limited to doing that at home.

The Acer Project DualPlay gaming laptop concept has other surprising features that really take gaming to the next level. Releasing the controller also pops out two high-fidelity 5W speakers from the sides, delivering audio that’s not impeded by desks or other obstacles. There’s also an overabundance of dynamic RGB lighting not only around the keyboard but also around the screen, flanking the detachable controllers, the infinity mirror lighting bar on the back, and even the controller’s joysticks. It definitely looks like a gaming laptop from the future, though it remains to be seen if it is far too ahead of its time as well.

The post Acer Project DualPlay Laptop Concept puts a unique twist to gaming on the go first appeared on Yanko Design.

It seems that we’re seeing a rather curious design trend in the gaming market. Once filled with plastic-encrusted designs, there are a few coming out with more stylish cases, be it for the device itself or for its accessories. Analogue just recently launched its CNC aluminum limited edition Pocket, but 8BitDo was actually a few steps ahead of it. Although one’s eleventh anniversary isn’t actually associated with metal (it’s Turquoise, by the way), the famed maker of throwback controllers released metal versions of its widely popular SN30 Pro, giving fans of the brand a collectible they can actually use and, in case of an emergency, even throw like a deadly weapon.

Designer: 8BitDo

Game controllers are made to be light enough not to cause hand strain but still have enough weight to feel substantial and improve gameplay. Gamers have come to expect that bulkier controllers that follow the Xbox and PlayStation designs would be heavier than most, especially controllers that are patterned after the designs of yesteryears. Not so this variant of the SN30 Pro, itself designed after the super lightweight Super Nintendo gamepad, mostly because most of its body is made of metal.

The Gold and Silver editions of the SN30 Pro aren’t just cheap paint jobs, though you might be forgiven for making that presumption given the resemblance to powder-coated metallic paint. It’s true metal, or as 8BitDo calls it, metal zinc alloy, and it’s used not just for the main body but for almost every part visible to the eyes. That includes buttons, triggers, and, yes, even the joysticks. The gold edition gets a matte paint finish while the silver version undergoes electroplating. The cables aren’t metal, though, which is probably for the best.

More than just visual oddities, the SN30 Pro Gold/Silver Edition controllers also have one other advantage over their plasticky older siblings. They’re built to last, at least more than the common controller, as metal will not warp or deform over time. It’s also less likely to crack when accidentally dropped, though you might dent this here and there. And drop it you might indeed, given how heavy it is 381g. For comparison, the normal SN30 Pro weighs a mere 114g and even the Xbox Wireless Controller is just around 287g.

Not all that glitters is gold, as they say, and despite the luster and heft of these limited edition controllers, their feature set might leave gamers sorely disappointed. They’re definitely more like functional collectors’ editions rather than serious gaming weapons (unless you throw it like one), and the $99.99 price tag definitely cements, or rather forges, that image.

The post 8BitDo SN30 Pro Gold and Silver controllers are as heavy as they look first appeared on Yanko Design.